Suits original Ford cast con rods only.Installation instructions:
Make sure that there is an adequate chamfer around the top of the connecting rod bolt hole to clear the radius under the head of the bolt.
Press the bolts into the connecting rods and install the rod caps.
Use ARP Ultra-Torque Fastener Assembly Lubricant to lubricate the threads of the bolt and the nut face. Then install the nuts onto the bolts and tighten them hand tight.
ARP recommends using the STRETCH METHOD when tightening the bolts. Following the instructions for using a stretch gauge, Stretch the bolts to 0.0060"-0.0065".
If you do not have a stretch gauge, torque the bolts to 40ft-lbs using ARP Ultra-Torque Fastener Assembly Lubricant.
A log should be kept on the original non-torqued length of each bolt. Bolts that have any permanent deformation or have increased in non-torqued length by more than 0.001" should be replaced.Ford SOHC Pinto
- Ford Capri Mk1/Mk2/Mk3 1.6/2.0 1972-1987
- Ford Cortina Mk3/Mk4/Mk5 1.6/2.0 1970-1982
- Ford Escort Mk1 RS2000 2.0 1973-1974
- Ford Escort Mk2 RS2000 2.0 & Mexico 1.6 1975-1980
- Ford Granada Mk1 2.0 1973-1977
- Ford Granada Mk2 1.6/2.0 1977-1985
- Ford Granada/Scorpio Mk3 1.8/2.0 1985-1989
- Ford Sierra 1.6/1.8/2.0 1982-1989
- Ford Transit Mk2/Mk3 1.6/2.0 1978-1994
- TVR Tamsin 200 2.0
- Additional Information
Part No ARPBE03 Fits Engine Type Ford SOHC (Pinto) Product Group Con Rod Bolts Replaces Part Nos FT1001 Stock Status Available From Stock Fits Engine Make Ford Catalogue 2017 Page Click HERE to view this part on page 44 of our 2017 catalogue Brand Logo
You may also be interested in the following product(s)
No Tax, Each £31.28 Taxed, Each £37.54
No Tax, Each £10.52 Taxed, Each £12.62
No Tax, Each £30.02 Taxed, Each £36.02
No Tax, Each £32.46 Taxed, Each £38.95
No Tax, Each £12.15 Taxed, Each £14.58
No Tax, Each £38.10 Taxed, Each £45.72