Suits original Ford con rods only.Installation instructions:
Make sure that there is an adequate chamfer around the top of the connecting rod bolt hole to clear the radius under the head of the bolt.
Use ARP Ultra-Torque Fastener Assembly Lubricant to lubricate the threads of the bolt and under the head of the bolt. Then install the bolts and tighten them hand tight.
ARP recommends using the STRETCH METHOD when tightening the bolts. Following the instructions for using a stretch gauge, Stretch the bolts to 0.0065"-0.0070".
If you do not have a stretch gauge, torque the bolts to 45ft-lbs using ARP Ultra-Torque Fastener Assembly Lubricant.
A log should be kept on the original non-torqued length of each bolt. Bolts that have any permanent deformation or have increased in non-torqued length by more than 0.001" should be replaced.Ford Cosworth YB 16v Turbo
- Ford Sierra RS Cosworth 3 door 1986-1987
- Ford Sierra Cosworth RS500 1987
- Ford Sierra Sapphire RS Cosworth 2wd 1988-1989
- Ford Sierra Sapphire RS Cosworth 4wd 1990-1992
- Ford Escort RS Cosworth 4wd T34 1992-06/1994
- Ford Escort RS Cosworth 4wd T25 06/1994-1996
- Additional Information
Part No SC248HD Fits Engine Type Ford Cosworth YB Product Group Con Rod Bolts Stock Status Stock Lead Time Typically 4-7 days Fits Engine Make Ford Catalogue 2017 Page Click HERE to view this part on page 44 of our 2017 catalogue Brand Logo Fits Model Variant Ford Escort Cosworth, Ford Sierra (2WD Cosworth), Ford Sierra (4WD Cosworth)
You may also be interested in the following product(s)
No Tax, Each £46.72 Taxed, Each £56.06
No Tax, Each £147.79 Taxed, Each £177.35
No Tax, Each £9.71 Taxed, Each £11.65
No Tax, Each £29.05 Taxed, Each £34.86
No Tax, Each £28.40 Taxed, Each £34.08
No Tax, Each £36.56 Taxed, Each £43.87