020 8518 9136sales@burtonpower.com

Welcome, Guest

ARP head stud kit: Ford CVH (not 1.8)

ARP head stud kit: Ford CVH (not 1.8)
No Tax, Each £123.90 Taxed, Each £148.68
Available From Stock
Free UK Delivery Available
Installation instructions....
OR
Description

Details

Installation instructions:

To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block (ideally with a thread chaser or tap).

Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension.

Screw studs into the block “HAND TIGHT ONLY”. NOTE: LOCTITE MAY BE USED IF A PERMANENT MOUNTING OF THE STUDS IS PREFERRED. THE FASTENERS, HOWEVER, MUST BE TORQUED PRIOR TO THE LOCTITE SETTING UP.

Install the cylinder head and check for binding or misalignment.

Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight.

ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to engine oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when engine oil or other low quality lubricants are used.

PRELOAD (TORQUE) RECOMMENDATIONS:

Following the manufacturers recommended torque sequence tighten the nuts in three equal steps to 60ft lbs with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT.

Ford CVH
Application:
  • Ford Escort Mk3/Orion 1.3/1.6/XR3 1980-1985
  • Ford Escort Mk3 1.6i/XR3i 1982-1985
  • Ford Escort Mk3 RS1600i 1981-1983
  • Ford Escort Mk3 RS Turbo Series 1 1984-1985
  • Ford Escort Mk4/Orion 1.4/1.6 1986-1990
  • Ford Escort Mk4 1.6i/XR3i MFi 1986-1989
  • Ford Escort Mk4 1.6i/XR3i EFi 1989-1990
  • Ford Escort Mk4 RS Turbo Series 2 1986-1990
  • Ford Escort Mk5/Mk6/Orion 1.4/1.6 (1.6 to 1992) 1990-2000
  • Ford Fiesta Mk2 1.3/1.4/1.6/XR2 1983-1989
  • Ford Fiesta Mk3 1.4/1.6 1989-1995
  • Ford Fiesta Mk3 XR2i & RS Turbo 1989-1992
  • Ford Sierra 1.6 1989-1993
  • Morgan 4/4 1.6 1982-1993
  • Reliant Scimitar SS1 1.3/1.4/1.6 1984-1990
  • Reliant Scimitar SST 1.4 1990-1992
  • Reliant Scimitar Sabre 1.4 1992-1993
Additional Information

Additional Information

Part No ARPHD10
Fits Engine Type Ford CVH
Product Group Head Bolts & Studs
Stock Status Available From Stock
Fits Engine Make Ford
Catalogue 2016 Page Click HERE to view this part on page 44 of our 2016 catalogue
Brand Logo ARP
Free Shipping Free UK Delivery Available

You may also be interested in the following product(s)