020 8518 9136sales@burtonpower.com

Welcome, Guest

ARP mains stud kit: Ford X/Flow OHV Kent, pre-X/Flow, Lotus Twin Cam & BDA

ARP mains stud kit: Ford X/Flow OHV Kent, pre-X/Flow, Lotus Twin Cam & BDA
No Tax, Each £87.71 Taxed, Each £105.25
Available From Stock
Free UK Delivery Available
Torque setting 70 ft lbs with ARP lube 85 ft lbs with oil 30....
OR
Description

Details

Installation instructions:

To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block (ideally with a thread chaser or tap).

Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension.

Screw studs into the block “HAND TIGHT ONLY”. NOTE: LOCTITE MAY BE USED IF A PERMANENT MOUNTING OF THE STUDS IS PREFERRED. THE FASTENERS, HOWEVER, MUST BE TORQUED PRIOR TO THE LOCTITE SETTING UP.

Install the main caps and check for binding or misalignment.

Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight.

ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to engine oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when engine oil or other low quality lubricants are used.

PRELOAD (TORQUE) RECOMMENDATIONS:

Following the manufacturers recommended torque sequence tighten the nuts in three equal steps to 80ft lbs with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT.

Ford Pre-Crossflow OHV Kent
Application:
  • Ford Anglia 105E 1.0 1959-1967
  • Ford Anglia 123E 1.2 1959-1967
  • Ford Cortina Mk1 1.2/1.5 1962-1966
  • Ford Cortina Mk2 1.2/1.3/1.5 1966-07/1967
  • Ford Consul Classic 1.3/1.5 1961-1963
  • Ford Consul Capri 1.3/1.5 1961-1964
  • Ford Consul Corsair 1.5 1964-1965
  • Ford Prefect 107E 1.0 1959-1961
  • Marcos 1500 GT
  • Morgan 4/4 1.0/1.3/1.5 1960-1968
Ford Crossflow OHV Kent
Application:
  • Ford Capri Mk1 1.3/1.6 1969-1974
  • Ford Capri Mk2/Mk3 1.3 1974-1987
  • Ford Cortina Mk2 1.3/1.6 07/67-1970
  • Ford Cortina Mk3 1.3/1.6 1970-1976
  • Ford Cortina Mk4/Mk5 1.3 1976-1982
  • Ford Escort Mk1 1.1/1.3/1.6 Mexico 1968-1974
  • Ford Escort Mk2 1.1/1.3/1.6 1975-1980
  • Ford Fiesta Mk1 1.3 Supersport/1.6 XR2 1980-1983
  • Caterham 7
  • Morgan 4/4 1600 1.6 1968-
  • TVR 1600M 1.6 1972-1977
Ford Lotus Twin Cam 8v 1558cc
Application:
  • Ford Lotus Cortina Mk1 1963-1966
  • Ford Lotus Cortina Mk2 1967-1970
  • Ford Escort Twin Cam 1968-1970
  • Lotus Elan 1962-1974
  • Lotus Europa 1971-1975
  • Caterham 7 1973–1974
Ford Cosworth BD Series 16v
Application:
  • Ford Escort Mk1 RS1600 1970-1974
  • Ford Escort Mk2 RS1800 1975-1977
  • BDA 1.6 road engine
  • BDB/BDC 1.7 rally/race engine
  • BDD 1.6 race Atlantic engine
  • BDE 1.8 race engine
  • BDG 2.0 race engine
  • BDH 1.3 race engine
  • BDJ 1.1 race engine
  • BDP 2.0 race engine
  • BDR 1.6/1.7 Caterham Super Seven engine
  • BDX 2.0+ race engine
Additional Information

Additional Information

Part No ARPMS01
Fits Engine Type Ford BDA/BDG 16v, Ford Cross Flow (Kent), Ford Lotus Twin Cam 1558cc 8v, Ford Pre Cross Flow
Product Group Main Cap Bolts & Studs
Stock Status Available From Stock
Fits Engine Make Ford
Catalogue 2016 Page Click HERE to view this part on page 44 of our 2016 catalogue
Brand Logo ARP
Free Shipping Free UK Delivery Available

You may also be interested in the following product(s)