DetailsThis popular 4 pot kit uses a larger 260mm vented disc with a fully dust sealed caliper. Included in the kit:
- Wilwood forged Midilite caliper x 2
- Caliper mounting bracket x 2
- Vented brake disc x 2
- Hardware kit
Note: brake pads are not included. Please see further below for the range of brake pad options for this kit.
Also note that brake hoses are also not included. The calipers have an M10x1 male outlet from the rear centre. Whilst many customers choose to make their own solutions (e.g. a new solid kunifer pipe), we can supply brake pipes made to your requirements.
Wilwood 4 Pot Forged Midilite Caliper: This four piston radial mount is of a new generation of Wilwood aluminium calipers produced from a drop-forged billet. This forging process produces a body design that provides higher strength and reduced load deflection superior to any cast or machined billet caliper. Combine this with substantial x-bolting and extended flank design, it is one of the stiffest radial mount calipers available.
Most multi-piston calipers suffer from low speed caliper squeal caused by pad torsional vibration. The Midilite caliper features the unique Wilwood SRS (Squeal Reduction System) incorporating stainless steel pad retainers. These retainers eliminate the bridge wear caused by pad gouging and reduce the pad rattle/vibration harmonics which are the primary cause of the annoying '4-pot squeal'. The clever quick change pad clip also allows ultra fast pad changes without hassle.
The caliper incorporates thick wall hard anodised pistons, is fully dust sealed and is supported by a range of brake pad compounds for road, rally and race applications.
Disc size: 260 x 20mm
Minimum wheel size: 13"Brake pads suitable for this kit (not included):
Wilwood SmartPad fast road brake pads: 150-8946
Wilwood PolyMatrix Q fast road brake pads: 15Q-7268K
Mintex M1144 fast road/track day brake pads: MDB2581M1144
Wilwood PolyMatrix E rally brake pads: 15E-7266K
Wilwood PolyMatrix A race brake pads: 15A-7263K
Mintex M1155 race brake pads: MDB2581M1155
- Ford Cortina Mk3 1970-1976
- Ford Cortina Mk4 1976-1979
- Ford Cortina Mk5 1979-1982
- Ford Taunus TC Mk1 1970-1975
- Ford Taunus TC2 Mk2 1976-1979
- Ford Taunus TC3 Mk3 1979-1982
- Kit cars based on Ford Cortina Mk3/4/5
- Additional Information
Part No RDBK1LL Product Group Brake Kits Stock Status Stock Lead Time Typically 1-3 days Catalogue 2018 Page Click HERE to view this part on page 121 of our 2018 catalogue Brand Logo Fits Model Variant Ford Cortina Mk3/Mk4/Mk5 Free Shipping
You may also be interested in the following product(s)
No Tax, Each £51.68 Taxed, Each £62.02
No Tax, Each £21.12 Taxed, Each £25.34
No Tax, Each £1,117.18 Taxed, Each £1,340.62
No Tax, Each £80.40 Taxed, Each £96.48
No Tax, Each £95.83 Taxed, Each £115.00
No Tax, Each £134.87 Taxed, Each £161.84