DetailsThis popular 4 pot kit uses a larger 260mm vented disc with a fully dust sealed caliper. Included in the kit:
- Wilwood forged Midilite caliper x 2
- Caliper mounting bracket x 2
- Vented brake disc x 2
- Hardware kit
Note: brake pads are not included. Please see further below for the range of brake pad options for this kit.
Also note that brake hoses are also not included. The calipers have an M10x1 male outlet from the rear centre. Whilst many customers choose to make their own solutions (e.g. a new solid kunifer pipe), we can supply brake pipes to suit (see further below).
Wilwood 4 Pot Forged Midilite Caliper: This four piston radial mount is of a new generation of Wilwood aluminium calipers produced from a drop-forged billet. This forging process produces a body design that provides higher strength and reduced load deflection superior to any cast or machined billet caliper. Combine this with substantial x-bolting and extended flank design, it is one of the stiffest radial mount calipers available.
Most multi-piston calipers suffer from low speed caliper squeal caused by pad torsional vibration. The Midilite caliper features the unique Wilwood SRS (Squeal Reduction System) incorporating stainless steel pad retainers. These retainers eliminate the bridge wear caused by pad gouging and reduce the pad rattle/vibration harmonics which are the primary cause of the annoying '4-pot squeal'. The clever quick change pad clip also allows ultra fast pad changes without hassle.
The caliper incorporates thick wall hard anodised pistons, is fully dust sealed and is supported by a range of brake pad compounds for road, rally and race applications.
Disc size: 260 x 20mm
Minimum wheel size: 13"Brake pads suitable for this kit (not included):
Wilwood SmartPad fast road brake pads: 150-8946
Wilwood PolyMatrix Q fast road brake pads: 15Q-7268K
Mintex M1144 fast road/track day brake pads: MDB2581M1144
Wilwood PolyMatrix E rally brake pads: 15E-7266K
Wilwood PolyMatrix A race brake pads: 15A-7263K
Mintex M1155 race brake pads: MDB2581M1155
Front flexible braided brake pipes suitable for this kit (not included):
Escort Mk1 (UNF): RDBKH1
Escort Mk2 (Metric): RDBKH2
- Ford Capri Mk1 excluding 3.0 V6 1969-1974
- Ford Capri Mk2 excluding 3.0 V6 1974-1978
- Ford Capri Mk3 excluding 3.0 V6 1978-1986
- Ford Escort Mk1 Twin Cam 1968-1971
- Ford Escort Mk1 Mexico 1970-1974
- Ford Escort Mk1 RS1600 1970-1974
- Ford Escort Mk1 RS2000 1973-1974
- Ford Escort Mk2 RS Mexico 1975-1978
- Ford Escort Mk2 RS1800 1975-1977
- Ford Escort Mk2 RS2000 1976-1980
- Additional Information
Part No RDBK1H Product Group Brake Kits Stock Status Available From Stock Catalogue 2017 Page Click HERE to view this part on page 123 of our 2017 catalogue Brand Logo Fits Model Variant Ford Capri Mk2/Mk3 (Not 3.0), Ford Escort Mk1 RS/Mexico, Ford Escort Mk2 (Not RS/Mexico) Free Shipping
You may also be interested in the following product(s)
No Tax, Each £51.68 Taxed, Each £62.02
No Tax, Each £82.84 Taxed, Each £99.41
No Tax, Each £117.77 Taxed, Each £141.32
No Tax, Each £101.57 Taxed, Each £121.88
No Tax, Each £50.34 Taxed, Each £60.41
No Tax, Each £15.84 Taxed, Each £19.01