Burton CNC machined cylinder heads Stage 1 Ford 2.8 V6 Cologne unleaded PCH100UN
Free Uk Delivery available
So surely all you need to do is buy some grinding stones and attack your own head, saving a fortune? Theoretically yes but how much to take off and where? Porting or gas flowing a head is a highly skilled job that requires years of development to perfect which initially includes trial and error to find the limitations of the castings. The ports are surrounded by water jackets by a wall thickness of an unknown size so an amateur would do well to complete the job without breaking through the port wall and ruining the head! The other equally important goal to successfully gas flowing a head, and this is obvious, is to make sure that the port modifications do actually improve the flow of the head. Gas flowing a port to its maximum size will not always mean it flows better, if the port is made too large then the gas flow will slow down resulting in loss of efficiency and loss of torque. Some of the head designs work well with extensive porting because the originals are relatively small. Others have ports that are considered almost too large so these designs benefit from attention to port angles and valve throat modifications. It is this experience and knowledge that goes into every Burton Power cylinder head.
Now CNC Machined!!!
Using the benefits of the latest technology and machinery, all Burton Power performance heads are now CNC machined. This increases the accuracy to which each head is modified and ensures that each cylinder port performs the same as the others. Each design has been copied from an optimised head using scanning technology which means every head performs identically and eradicates any variations due to hand machining.
CNC machined stage 1 cylinder heads for 2.8 Cologne/Taunus V6 unleaded:
Each casting is cleaned and crack tested prior to modification. Original valve guide area of the head is machined out to accept our loose cast iron guides. Spring seats are deepened to suit HD valve springs and allow higher camshaft lifts. Hardened exhaust valve seats are fitted. Inlet and exhaust ports are CNC profiled to suit the valve sizes. Cylinder head face is skimmed. Chambers are CNC machined to equalise them. External casting faces are painted black. Head is fitted and assembled with:
- Std 42.1mm inlet valves
- Std 36.1mm exhaust valves
- Cast iron valve guides
- Heavy duty single valve springs
- New steel retainers
- New valve cotters
- Stem seals
- Core plugs
Surcharges - all cylinder heads are priced on an exchange basis and an old core surcharge will be applied to all cylinder head orders placed on this website. This is subject to the availability of old core, where this is not available, the customer will have to supply a unit suitable for modification. The surcharge is refundable subject to returning a suitable old core unit. Old core units must be crack-free, in a serviceable condition, unmodified and supplied stripped. If you wish to avoid the paying the surcharge by supplying an old core unit in advance then please contact a member of our sales team.
Part No | PCH100UN |
---|---|
Fits Engine Type | Ford Taunus/Cologne V4/V6 |
Product Group | Cylinder Heads |
Stock Status | Stock Lead Time Typically 5-6 weeks |
Fits Engine Make | Ford |
Catalogue 2024 Page | Click HERE to view this part on page 31 of our 2024 catalogue |
Brand Logo |
We aim to dispatch all stocked orders either same day (Monday-Friday) or by the following working day (subject to time of order). Orders are shipped by DHL courier service.
For orders that require a guaranteed quick delivery, please contact our sales staff directly by phone who can advise further on your request.
Shipping Prices UKAll orders under £250 will be sent by DHL courier service
Up to 3kg £8.00
3kg-20kg £9.60
All UK orders over £250 are shipped free of charge by DHL.
Shipping Prices OverseasAll deliveries are sent by DHL courier service. Most European countries have the option of an Economy Road Service (with prices starting from £26.00) and Express Air Service. All non-European countries are sent by DHL Air Express. To get a quote for shipping, simply enter the items into the cart, click on ‘My Cart’ and select your country. You do not need to be logged in to use this service.
Note: we are unable to export dangerous goods such as aerosol cans and such items must be removed from the cart before you can proceed with your order.
So surely all you need to do is buy some grinding stones and attack your own head, saving a fortune? Theoretically yes but how much to take off and where? Porting or gas flowing a head is a highly skilled job that requires years of development to perfect which initially includes trial and error to find the limitations of the castings. The ports are surrounded by water jackets by a wall thickness of an unknown size so an amateur would do well to complete the job without breaking through the port wall and ruining the head! The other equally important goal to successfully gas flowing a head, and this is obvious, is to make sure that the port modifications do actually improve the flow of the head. Gas flowing a port to its maximum size will not always mean it flows better, if the port is made too large then the gas flow will slow down resulting in loss of efficiency and loss of torque. Some of the head designs work well with extensive porting because the originals are relatively small. Others have ports that are considered almost too large so these designs benefit from attention to port angles and valve throat modifications. It is this experience and knowledge that goes into every Burton Power cylinder head.
Now CNC Machined!!!
Using the benefits of the latest technology and machinery, all Burton Power performance heads are now CNC machined. This increases the accuracy to which each head is modified and ensures that each cylinder port performs the same as the others. Each design has been copied from an optimised head using scanning technology which means every head performs identically and eradicates any variations due to hand machining.
CNC machined stage 1 cylinder heads for 2.8 Cologne/Taunus V6 unleaded:
Each casting is cleaned and crack tested prior to modification. Original valve guide area of the head is machined out to accept our loose cast iron guides. Spring seats are deepened to suit HD valve springs and allow higher camshaft lifts. Hardened exhaust valve seats are fitted. Inlet and exhaust ports are CNC profiled to suit the valve sizes. Cylinder head face is skimmed. Chambers are CNC machined to equalise them. External casting faces are painted black. Head is fitted and assembled with:
- Std 42.1mm inlet valves
- Std 36.1mm exhaust valves
- Cast iron valve guides
- Heavy duty single valve springs
- New steel retainers
- New valve cotters
- Stem seals
- Core plugs
Surcharges - all cylinder heads are priced on an exchange basis and an old core surcharge will be applied to all cylinder head orders placed on this website. This is subject to the availability of old core, where this is not available, the customer will have to supply a unit suitable for modification. The surcharge is refundable subject to returning a suitable old core unit. Old core units must be crack-free, in a serviceable condition, unmodified and supplied stripped. If you wish to avoid the paying the surcharge by supplying an old core unit in advance then please contact a member of our sales team.
Part No | PCH100UN |
---|---|
Fits Engine Type | Ford Taunus/Cologne V4/V6 |
Product Group | Cylinder Heads |
Stock Status | Stock Lead Time Typically 5-6 weeks |
Fits Engine Make | Ford |
Catalogue 2024 Page | Click HERE to view this part on page 31 of our 2024 catalogue |
Brand Logo |
We aim to dispatch all stocked orders either same day (Monday-Friday) or by the following working day (subject to time of order). Orders are shipped by DHL courier service.
For orders that require a guaranteed quick delivery, please contact our sales staff directly by phone who can advise further on your request.
Shipping Prices UKAll orders under £250 will be sent by DHL courier service
Up to 3kg £8.00
3kg-20kg £9.60
All UK orders over £250 are shipped free of charge by DHL.
Shipping Prices OverseasAll deliveries are sent by DHL courier service. Most European countries have the option of an Economy Road Service (with prices starting from £26.00) and Express Air Service. All non-European countries are sent by DHL Air Express. To get a quote for shipping, simply enter the items into the cart, click on ‘My Cart’ and select your country. You do not need to be logged in to use this service.
Note: we are unable to export dangerous goods such as aerosol cans and such items must be removed from the cart before you can proceed with your order.