Designed for short oval racing where regulations state the standard Weber DGV carb must be retained (2.0 Hot Rods, Lightning Rods, Superstox). High lift competition cam that will require the valve springs seats deepening to prevent coil binding. Suitable for carburettor applications only. Kit includes: camshaft, CF36 followers, valve springs, balls studs, spray bar, stem seals & cam lube.
Power Band: 2500-7000rpm
Valve Lift: 0.512" inlet/0.491" exhaust
Duration: 304° inlet/292° exhaust
Timing Figures: 44/77/77/41
Inlet Timing: 105° ATDC
Inlet Valve Lift at TDC: 0.135"
Valve Clearances: .010" inlet/.012" exhaust
Valve lifts quoted using a theoretical rocker ratio of 1.69:1- inlet,1.65:1 - exhaust. Durations quoted at .010” / .25mm checking height.Recommended parts to fit with this camshaft:
Adjustable Cam Pulley (Steel): FT310A
Adjustable Cam Pulley (Alloy, blue): FT311E(BLUE)
Adjustable Cam Pulley (Alloy, red): FT311E(RED)
- Additional Information
Part No KCRL30K Fits Engine Type Ford SOHC (Pinto) Product Group Camshafts Stock Status Available From Stock Fits Engine Make Ford Catalogue 2016 Page Click HERE to view this part on page 25 of our 2017 catalogue Brand Logo Free Shipping