020 8518 9136sales@burtonpower.com

Welcome, Guest

Burton rally camshaft (regrind) .390" lift/310deg duration: Ford X/Flow & pre-X/Flow OHV Kent

Burton rally camshaft (regrind) .390" lift/310deg duration: Ford X/Flow & pre-X/Flow OHV Kent
No Tax, Each £67.28 Taxed, Each £80.74
Stock Lead Time Typically 4-7 days
Customer must supply suitable cam for regrind. Exchange regr....
No Tax, Each £67.28 Taxed, Each £80.74
Description

Details

Customer must supply suitable cam for regrind. Exchange regrind camshaft.
For the enthusiast who requires more performance than the A2 can offer, but without the characteristic excesses of a full race cam (such as A6 or A8). Users must expect some loss of flexibility in the lower rev range. Good power band between 4000-8000rpm. Valve spring platforms should be machined to give a fitted valve spring length of 1.300”/1.310” (33/33.25mm). X/flow types may also require deeper valve pockets in the pistons. Ensure a minimum clearance of .160” (4mm) between piston at TDC and the valve head face.

Power Band: 4000-8000rpm

Valve Lift: 0.388" inlet/0.386" exhaust

Duration: 310°

Timing Figures: 47/83/83/47

Inlet Timing: 108° ATDC

Inlet lift at TDC: 0.113"

Valve Clearances: .020" inlet/.022" exhaust

Valve lifts are quoted using a theoretical rocker ratio of 1.52:1. Durations quoted at .016”/.40mm checking height.

Recommended parts to fit with this camshaft:
New cam followers: FP210 (pre-X/flow & early X/Flow, 11.1mm stem)
New cam followers: FP211 (711M X/Flow, 13.1mm stem)
Valve Springs: VS7
Valve Spring Retainers: FP350
Adjustable Cam Sprocket (single chain): FP318.2
Adjustable Cam Sprocket Kit (single chain): FP318K (cam sprocket, crank sprocket & chain)
Adjustable Cam Sprocket Kit (duplex chain): FP317K (cam sprocket, crank sprocket & chain)

Ford Pre-Crossflow OHV Kent
Application:
  • Ford Anglia 105E 1.0 1959-1967
  • Ford Anglia 123E 1.2 1959-1967
  • Ford Cortina Mk1 1.2/1.5 1962-1966
  • Ford Cortina Mk2 1.2/1.3/1.5 1966-07/1967
  • Ford Consul Classic 1.3/1.5 1961-1963
  • Ford Consul Capri 1.3/1.5 1961-1964
  • Ford Consul Corsair 1.5 1964-1965
  • Ford Prefect 107E 1.0 1959-1961
  • Marcos 1500 GT
  • Morgan 4/4 1.0/1.3/1.5 1960-1968
Ford Crossflow OHV Kent
Application:
  • Ford Capri Mk1 1.3/1.6 1969-1974
  • Ford Capri Mk2/Mk3 1.3 1974-1987
  • Ford Cortina Mk2 1.3/1.6 07/67-1970
  • Ford Cortina Mk3 1.3/1.6 1970-1976
  • Ford Cortina Mk4/Mk5 1.3 1976-1982
  • Ford Escort Mk1 1.1/1.3/1.6 Mexico 1968-1974
  • Ford Escort Mk2 1.1/1.3/1.6 1975-1980
  • Ford Fiesta Mk1 1.3 Supersport/1.6 XR2 1980-1983
  • Caterham 7
  • Morgan 4/4 1600 1.6 1968-
  • TVR 1600M 1.6 1972-1977
Additional Information

Additional Information

Part No A3X
Fits Engine Type Ford Cross Flow (Kent), Ford Pre Cross Flow
Product Group Camshafts
Stock Status Stock Lead Time Typically 4-7 days
Fits Engine Make Ford
Brand Logo Burton Power