The A Ring type clutch assembly utilises an adaptor ring and separate cover. The cover is supplied in aluminium but is also available in steel. Although there is no functional difference between these covers, the alloy cover saves approximately 300g, giving a lower inertia. Use with sintered type clutch plate which must be purchased separately (most common type is CP2012). Sintered clutches are primarily used for circuit race applications and do not suit applications where a degree of clutch slip is required (such as rallying, hill climbing, etc).Torque capacity: 848Nm(625lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
A ring assembly - CP2012-162
Main pressure plate - CP2616-103
Intermediate pressure plate - CP2613-103
Diaphragm cover assembly - CP2580-1GRY
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
- Additional Information
Part No CP2125ACRV Product Group Clutches: 7.25" AP Racing Replaces Part Nos FP269AGY Stock Status Stock Lead Time Typically 3-4 weeks Catalogue 2017 Page Click HERE to view this part on page 112 of our 2017 catalogue Brand Logo Free Shipping Additional Information