The A Ring type clutch assembly utilises an adaptor ring and separate aluminium cover. Use with sintered type clutch plate which must be purchased separately (most common type is CP2012). Sintered clutches are primarily used for circuit race applications and do not suit applications where a degree of clutch slip is required (such as rallying, hill climbing, etc). 12 bolt fixing.Torque capacity: 631Nm(465lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3 (outer plate, 2 required); CP2012-179FM3 (inner plate, 1 required)
1" x 23 spline - CP2012-165FM3 (outer plate, 2 required); CP2012-178FM3 (inner plate, 1 required)
Replacement spare parts:
A ring assembly - CP2616-8
Main pressure plate - CP2616-103
Intermediate pressure plate - CP2613-103
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
- Additional Information
Part No CP2817AORA Product Group Clutches: 7.25" AP Racing Replaces Part Nos FP274A Stock Status Stock Lead Time Typically 3-4 weeks Catalogue 2018 Page Click HERE to view this part on page 110 of our 2018 catalogue Brand Logo Free Shipping Additional Information
You may also be interested in the following product(s)
No Tax, Each £165.34 Taxed, Each £198.41