The Lug Drive type assembly utilises a one piece aluminium alloy cover and lug design which provides structural strength, lower inertia and cooler running. This design also allows for friction dust to freely escape.Torque capacity: 798Nm(588lb/ft).
Use with sintered type clutch plate which must be purchased separately (most common type is CP2012). Sintered clutches are primarily used for circuit race applications and do not suit applications where a degree of clutch slip is required (such as rallying, hill climbing, etc).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3 (outer plate, 2 required); CP2012-179FM3 (inner plate, 1 required)
1" x 23 spline - CP2012-165FM3 (outer plate, 2 required); CP2012-178FM3 (inner plate, 1 required)
Replacement spare parts:
Wear clips - CP3913-103
Main pressure plate - CP3921-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
- Additional Information
Part No CP7373-OE90-SF Product Group Clutches: 7.25" AP Racing Replaces Part Nos FP274L Stock Status Available From Stock Catalogue 2017 Page Click HERE to view this part on page 112 of our 2017 catalogue Brand Logo Free Shipping Additional Information