020 8518 9136sales@burtonpower.com

Welcome, Guest

Cometic multi-shim head gasket 91mm Ford BDG FB754

Cometic multi-shim head gasket 91mm Ford BDG FB754
No Tax, Each £73.09 Taxed, Each £87.71
Available From Stock
Cometic MLS gaskets are comprised of multiple layers of stai....


Cometic part number: C4494-040
Gasket bore: 91mm
Gasket thickness: 0.040" (1.02mm)
Gasket type: multi-layer shim steel

Cometic MLS gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion. The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber based material that is heat resistant to 250C / 482F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The centre or shim layer is a uncoated stainless steel layer which can be varied to accommodate multiple thickness requirements. They provide maximum sealing performance for today’s high output engines and require no sealants. Ideal for aluminium heads to aluminium blocks and aluminium heads to cast iron blocks withstanding the shearing force created by the two materials.

No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion.

A surface finish of 50 microinches or finer is recommended for a proper gasket seal. Anything rougher may result in gasket failure.

Ford Cosworth BD Series 16v
  • BDG 2.0 race engine
  • BDP 2.0 race engine
  • BDX 2.0+ race engine
Additional Information

Additional Information

Part No FB754
Fits Engine Type Ford BDA/BDG 16v
Part Type Head Gasket
Product Group Gaskets & Seals
Replaces Part Nos C4494-040 FB733B
Stock Status Available From Stock
Fits Engine Make Ford
Material Multi Layer Steel (MLS)
Catalogue 2018 Page Click HERE to view this part on page 40 of our 2018 catalogue
Brand Logo Cometic Gaskets

You may also be interested in the following product(s)