- Cast in high grade aluminium.
- 7/8" long scavenge rotor.
- Efficient gallery design keeps oil flow at a maximum.
- Balanced pressure relief valve system delivers a smooth oil flow without large fluctuations of oil pressure.
Note: fittings not included - order separately. Use scavenge pipe DSE003A.Oil feed inlet from oil tank - 1/2" BSP threaded port. Use a minimum of 5/8" ID hose if the tank is no more than 2 metres from the pump. Use 3/4" ID hose if further away e.g. boot mounted tank. Do not use sharp right angle bends or banjo unions as it could result in severe cavitation.
Pressure feed to oil filter - 1/2" BSP threaded port. Use either 1/2" ID hose or 5/8" ID hose. Provides a pressured feed of oil to a remote filter.
Pressure feed from filter to engine - 1/2" BSP threaded port. Use either 1/2" ID hose or 5/8" ID hose. High pressure oil from the remote oil filter returns and feeds the engine through this port.
Scavenge inlet from sump - Unthreaded port to suit DSE003A scavenge pipe (retained by circlip). Use 3/4" ID hose. Pump sucks oil from the sump through this port.
Scavenge outlet to oil tank - 1/2" BSP threaded port. Use 5/8" ID hose. Pump returns oil to the oil tank via an oil cooler.
Ford Pre-Crossflow OHV Kent
- Ford Anglia 105E 1.0 1959-1967
- Ford Anglia 123E 1.2 1959-1967
- Ford Cortina Mk1 1.2/1.5 1962-1966
- Ford Cortina Mk2 1.2/1.3/1.5 1966-07/1967
- Ford Consul Classic 1.3/1.5 1961-1963
- Ford Consul Capri 1.3/1.5 1961-1964
- Ford Consul Corsair 1.5 1964-1965
- Ford Prefect 107E 1.0 1959-1961
- Marcos 1500 GT
- Morgan 4/4 1.0/1.3/1.5 1960-1968
- Ford Capri Mk1 1.3/1.6 1969-1974
- Ford Capri Mk2/Mk3 1.3 1974-1987
- Ford Cortina Mk2 1.3/1.6 07/67-1970
- Ford Cortina Mk3 1.3/1.6 1970-1976
- Ford Cortina Mk4/Mk5 1.3 1976-1982
- Ford Escort Mk1 1.1/1.3/1.6 Mexico 1968-1974
- Ford Escort Mk2 1.1/1.3/1.6 1975-1980
- Ford Fiesta Mk1 1.3 Supersport/1.6 XR2 1980-1983
- Caterham 7
- Morgan 4/4 1600 1.6 1968-
- TVR 1600M 1.6 1972-1977
- Ford Lotus Cortina Mk1 1963-1966
- Ford Lotus Cortina Mk2 1967-1970
- Ford Escort Twin Cam 1968-1970
- Lotus Elan 1962-1974
- Lotus Europa 1971-1975
- Caterham 7 1973–1974
- Ford Escort Mk1 RS1600 1970-1974
- Ford Escort Mk2 RS1800 1975-1977
- BDA 1.6 road engine
- BDB/BDC 1.7 rally/race engine
- BDD 1.6 race Atlantic engine
- BDE 1.8 race engine
- BDG 2.0 race engine
- BDH 1.3 race engine
- BDJ 1.1 race engine
- BDP 2.0 race engine
- BDR 1.6/1.7 Caterham Super Seven engine
- BDX 2.0+ race engine
- Additional Information
Part No DSE001A Fits Engine Type Ford BDA/BDG 16v, Ford Cross Flow (Kent), Ford Lotus Twin Cam 1558cc 8v, Ford Pre Cross Flow Product Group Oil Pumps (Dry Sump) & Kits Stock Status Available From Stock Fits Engine Make Ford Catalogue 2017 Page Click HERE to view this part on page 36 of our 2017 catalogue Brand Logo Free Shipping
You may also be interested in the following product(s)
No Tax, Each £33.72 Taxed, Each £40.46
No Tax, Each £22.35 Taxed, Each £26.82
No Tax, Each £54.40 Taxed, Each £65.28
No Tax, Each £341.25 Taxed, Each £409.50
Titan alloy dry sump oil pan: Ford X/Flow, BDA, etc (rear drain channel - Escort RWD) 3/4" scavenge DSE008CNo Tax, Each £341.25 Taxed, Each £409.50
No Tax, Each £40.54 Taxed, Each £48.65