Farndon EN40B steel crankshaft 77.65mm, narrow journal, 12 bolt: Ford BDA\BDG FB324N\77.65
Free Uk Delivery available
All Farndon crankshafts are designed and manufactured to your exact needs; they are produced in house, from the very best material.
Material:Farndon’s steel supplier is Corus. Corus is one of the worlds leading producers of alloy and aircraft steels. Material is manufactured to the highest cleanliness and quality standards, exceeding the minimum requirements of the British standards.
Their experience over many years has shown Corus material most suited to the manufacturer of crankshafts. Cleanliness means rejections, due to steel defects are minimal. Ultrasonic examination is carried out on the rolled bar after heat treatment to ensure there is no cracking.
The sulphur content is controlled to give good mach inability and minimize the risks of sulphides causing problems with finished components.
We believe this contributes significantly to producing high quality crankshafts.
Heat treatment:All Farndon crankshafts are heat treated to raise the core strength of the crankshaft. The procedure we use is dependant on the application of the engine.
Nitriding:The crankshafts are Nitrided for 72 hours (unless otherwise stated by the customer). This procedure gives the crankshaft a case depth of min .5mm to .6mm and a minimum hardness of 750HV. The benefit of this is to give the crankshaft a much harder wearing surface.
All Farndon EN40B steel crankshafts are manufactured from solid steel billet. Farndon are also able to manufacture any crankshaft on a one-off basis. Please enquire if your application is not listed.
Ford Cosworth BD Series 16vApplication:
- Ford Escort Mk1 RS1600 1970-1974
- Ford Escort Mk2 RS1800 1975-1977
- BDA 1.6 road engine
- BDB/BDC 1.7 rally/race engine
- BDD 1.6 race Atlantic engine
- BDE 1.8 race engine
- BDG 2.0 race engine
- BDH 1.3 race engine
- BDJ 1.1 race engine
- BDP 2.0 race engine
- BDR 1.6/1.7 Caterham Super Seven engine
- BDT 1.8 RS200 engine
- BDX 2.0+ race engine
Part No | FB324N/77.65 |
---|---|
Fits Engine Type | Ford BDA/BDG 16v |
Product Group | Crankshafts |
Stock Status | Available From Stock |
Fits Engine Make | Ford |
Catalogue 2024 Page | Click HERE to view this part on page 20 of our 2024 catalogue |
Brand Logo |
We aim to dispatch all stocked orders either same day (Monday-Friday) or by the following working day (subject to time of order). Orders are shipped by DHL courier service.
For orders that require a guaranteed quick delivery, please contact our sales staff directly by phone who can advise further on your request.
Shipping Prices UKAll orders under £250 will be sent by DHL courier service
Up to 3kg £8.00
3kg-20kg £9.60
All UK orders over £250 are shipped free of charge by DHL.
Shipping Prices OverseasAll deliveries are sent by DHL courier service. Most European countries have the option of an Economy Road Service (with prices starting from £26.00) and Express Air Service. All non-European countries are sent by DHL Air Express. To get a quote for shipping, simply enter the items into the cart, click on ‘My Cart’ and select your country. You do not need to be logged in to use this service.
Note: we are unable to export dangerous goods such as aerosol cans and such items must be removed from the cart before you can proceed with your order.
All Farndon crankshafts are designed and manufactured to your exact needs; they are produced in house, from the very best material.
Material:Farndon’s steel supplier is Corus. Corus is one of the worlds leading producers of alloy and aircraft steels. Material is manufactured to the highest cleanliness and quality standards, exceeding the minimum requirements of the British standards.
Their experience over many years has shown Corus material most suited to the manufacturer of crankshafts. Cleanliness means rejections, due to steel defects are minimal. Ultrasonic examination is carried out on the rolled bar after heat treatment to ensure there is no cracking.
The sulphur content is controlled to give good mach inability and minimize the risks of sulphides causing problems with finished components.
We believe this contributes significantly to producing high quality crankshafts.
Heat treatment:All Farndon crankshafts are heat treated to raise the core strength of the crankshaft. The procedure we use is dependant on the application of the engine.
Nitriding:The crankshafts are Nitrided for 72 hours (unless otherwise stated by the customer). This procedure gives the crankshaft a case depth of min .5mm to .6mm and a minimum hardness of 750HV. The benefit of this is to give the crankshaft a much harder wearing surface.
All Farndon EN40B steel crankshafts are manufactured from solid steel billet. Farndon are also able to manufacture any crankshaft on a one-off basis. Please enquire if your application is not listed.
Ford Cosworth BD Series 16vApplication:
- Ford Escort Mk1 RS1600 1970-1974
- Ford Escort Mk2 RS1800 1975-1977
- BDA 1.6 road engine
- BDB/BDC 1.7 rally/race engine
- BDD 1.6 race Atlantic engine
- BDE 1.8 race engine
- BDG 2.0 race engine
- BDH 1.3 race engine
- BDJ 1.1 race engine
- BDP 2.0 race engine
- BDR 1.6/1.7 Caterham Super Seven engine
- BDT 1.8 RS200 engine
- BDX 2.0+ race engine
Part No | FB324N/77.65 |
---|---|
Fits Engine Type | Ford BDA/BDG 16v |
Product Group | Crankshafts |
Stock Status | Available From Stock |
Fits Engine Make | Ford |
Catalogue 2024 Page | Click HERE to view this part on page 20 of our 2024 catalogue |
Brand Logo |
We aim to dispatch all stocked orders either same day (Monday-Friday) or by the following working day (subject to time of order). Orders are shipped by DHL courier service.
For orders that require a guaranteed quick delivery, please contact our sales staff directly by phone who can advise further on your request.
Shipping Prices UKAll orders under £250 will be sent by DHL courier service
Up to 3kg £8.00
3kg-20kg £9.60
All UK orders over £250 are shipped free of charge by DHL.
Shipping Prices OverseasAll deliveries are sent by DHL courier service. Most European countries have the option of an Economy Road Service (with prices starting from £26.00) and Express Air Service. All non-European countries are sent by DHL Air Express. To get a quote for shipping, simply enter the items into the cart, click on ‘My Cart’ and select your country. You do not need to be logged in to use this service.
Note: we are unable to export dangerous goods such as aerosol cans and such items must be removed from the cart before you can proceed with your order.