All Farndon crankshafts are designed and manufactured to your exact needs; they are produced in house, from the very best material.Material:
Farndon’s steel supplier is Corus. Corus is one of the worlds leading producers of alloy and aircraft steels. Material is manufactured to the highest cleanliness and quality standards, exceeding the minimum requirements of the British standards.
Their experience over many years has shown Corus material most suited to the manufacturer of crankshafts. Cleanliness means rejections, due to steel defects are minimal. Ultrasonic examination is carried out on the rolled bar after heat treatment to ensure there is no cracking.
The sulphur content is controlled to give good mach inability and minimize the risks of sulphides causing problems with finished components.
We believe this contributes significantly to producing high quality crankshafts.Heat treatment:
All Farndon crankshafts are heat treated to raise the core strength of the crankshaft. The procedure we use is dependant on the application of the engine.Nitriding:
The crankshafts are Nitrided for 72 hours (unless otherwise stated by the customer). This procedure gives the crankshaft a case depth of min .5mm to .6mm and a minimum hardness of 750HV. The benefit of this is to give the crankshaft a much harder wearing surface.
All Farndon EN40B steel crankshafts are manufactured from solid steel billet. Farndon are also able to manufacture any crankshaft on a one-off basis. Please enquire if your application is not listed.Ford Cosworth YB 16v Turbo
- Ford Sierra RS Cosworth 3 door 1986-1987
- Ford Sierra Cosworth RS500 1987
- Ford Sierra Sapphire RS Cosworth 2wd 1988-1989
- Ford Sierra Sapphire RS Cosworth 4wd 1990-1992
- Ford Escort RS Cosworth 4wd T34 1992-06/1994
- Ford Escort RS Cosworth 4wd T25 06/1994-1996
- Additional Information
Part No SC324/77 Fits Engine Type Ford Cosworth YB, Ford SOHC (Pinto) Product Group Crankshafts Stock Status Stock Lead Time Typically 5-6 weeks Fits Engine Make Ford Catalogue 2018 Page Click HERE to view this part on page 19 of our 2018 catalogue Brand Logo Fits Model Variant Ford Escort Cosworth, Ford Sierra (2WD Cosworth), Ford Sierra (4WD Cosworth) Free Shipping
You may also be interested in the following product(s)
No Tax, Each £0.53 Taxed, Each £0.64
No Tax, Each £155.59 Taxed, Each £186.71
No Tax, Each £9.71 Taxed, Each £11.65
Crank spigot bearing (21x15mm): Ford X/Flow OHV Kent, SOHC Pinto, Lotus Twin Cam (6 bolt crank), BDA/BDG, Cosworth YB, Taunus/Cologne, Zetec E RWD, Duratec HE I4 RWD, DOHC 8v/16v RWD FP347No Tax, Each £4.84 Taxed, Each £5.81
No Tax, Each £46.72 Taxed, Each £56.06
Ring gear pre-engaged 10.167" turned diameter - suits Burton steel flywheels & OE flywheels 1970- FT257BNo Tax, Each £40.54 Taxed, Each £48.65