Designed for short oval racing where regulations state the standard Weber DGV carb must be retained (2.0 Hot Rods, Lightning Rods, Superstox). High lift competition cam that will require the valve springs seats deepening to prevent coil binding. Suitable for carburettor applications only.
Power Band: 2500-7000rpm
Valve Lift: 0.512" inlet/0.491" exhaust
Duration: 304° inlet/292° exhaust
Timing Figures: 44/77/77/41
Inlet Timing: 105° ATDC
Inlet Valve Lift at TDC: 0.135"
Valve Clearances: .010" inlet/.012" exhaust
Valve lifts quoted using a theoretical rocker ratio of 1.69:1- inlet,1.65:1 - exhaust. Durations quoted at .010” / .25mm checking height.Recommended parts to fit with this camshaft:
Valve Springs: FT415 or VS41
Spray bar: FT1059
Adjustable Cam Pulley (Steel): FT310A
Adjustable Cam Pulley (Alloy, blue): FT311E(BLUE)
Adjustable Cam Pulley (Alloy, red): FT311E(RED)
- Additional Information
Part No KCRL30 Fits Engine Type Ford SOHC (Pinto) Product Group Camshafts Stock Status Stock Lead Time Typically 1-2 weeks Fits Engine Make Ford Catalogue 2017 Page Click HERE to view this part on page 25 of our 2017 catalogue Brand Logo Free Shipping