020 8518 9136sales@burtonpower.com

Welcome, Guest

Mains bearing set .5mm: Ford Cosworth YB to YBB1613 & Pinto SOHC SC481S/.5MM

Mains bearing set .5mm: Ford Cosworth YB to YBB1613 & Pinto SOHC SC481S/.5MM
No Tax, Each £64.96 Taxed, Each £77.95
Available from Stock (while stock lasts)
Early Cosworth YB & race spec SOHC Pinto. Genuine vandervell bearings - half....


Early Cosworth YB & race spec SOHC Pinto. Genuine Cosworth spec bearings - half plain/half grooved
Genuine Cosworth bearings manufactured by Vandervell. Journal diameter 56.475/56.459mm. Keep width: 3.9mm block & main cap.

To YBB1613 - what does this mean?
Early 3 Door Cosworth models with engines up to number YBB1613 (this number is stamped on the front face of the block just above the water pump) had slightly different bearings from later engines. The bearing keep (or notch) is the same size in the block and the main bearing cap. Engines produced after this have a wider keep in the main cap. Therefore if you try to fit later bearings to an early engine, the main cap bearings will not fit unless they are modified. This change in bearing design makes it impossible to fit the bearings incorrectly in later engines- grooved bearing in the block, plain bearing in the cap.

What's the difference between Cosworth YB and Pinto main bearings?
Apart from the keep width in later engines mentioned above, the difference is the main cap bearing. The Cosworth engine uses a plain bearing which is capable of taking greater loads than the grooved bearing found in Pinto sets. Whilst a Pinto set will fit, we highly recommend sticking to the correct bearings that Cosworth have always specified for Cosworth YB applications. This also means that these bearings are suitable as a HD replacement in all SOHC Pinto engines.

Ford SOHC Pinto
  • Ford Capri Mk1/Mk2/Mk3 1.6/2.0 1972-1987
  • Ford Cortina Mk3/Mk4/Mk5 1.6/2.0 1970-1982
  • Ford Escort Mk1 RS2000 2.0 1973-1974
  • Ford Escort Mk2 RS2000 2.0 & Mexico 1.6 1975-1980
  • Ford Granada Mk2 1.6/2.0 1977-1985
  • Ford Granada/Scorpio Mk3 1.8/2.0 1985-1989
  • Ford Sierra 1.6/1.8/2.0 1982-1989
  • Ford Transit Mk2/Mk3 1.6/2.0 1978-1994
  • TVR Tamsin 200 2.0
Ford Cosworth YB 16v Turbo
  • Ford Sierra RS Cosworth 3 door 1986-1987 to engine YBB1613
Additional Information

Additional Information

Part No SC481S/.5MM
Fits Engine Type Ford Cosworth YB, Ford SOHC (Pinto)
Product Group Crank Bearings & T/Washers
Stock Status Available from Stock (while stock lasts)
Fits Engine Make Ford
Catalogue 2018 Page Click HERE to view this part on page 21 of our 2018 catalogue
Brand Logo Cosworth
Fits Model Variant Ford Sierra (2WD Cosworth)

You may also be interested in the following product(s)