020 8518 9136sales@burtonpower.com

Welcome, Guest

Jetex Exhaust System Components

Jetex

When building an exhaust system, it is important to purchase exhaust parts that give good damping effects and flow characteristics in order to obtain the best performance from the engine. With the Jetex universal range, it is possible to construct a performance exhaust with suitable angled pieces and silencer boxes - available in 1.75", 2", 2.5", 3" and 3.5". For competition use, it is necessary to consider noise regulations. Jetex 2.5” and 3” absorption boxes are well insulated with wire wool around the centre tubing to ensure that the insulation does not burn out and raise noise levels. All standard Jetex components are made from aluminised/mild steel, with a comprehensive range now available in stainless steel (stainless steel part numbers have an ‘R’ suffix).
JetexNote: all Jetex universal tailpipes are finished in stainless steel and contain damping inserts
When assembling a D.I.Y. system, the following should be taken into account:
4 cylinder engines for street use - 2 or 3 silencers
4 cylinder engines for competition use - 1 or 2 silencers
6 cylinder engines for street use - 3 or 4 silencers
6 cylinder engines for competition use - 2 or 3 silencers

Straight Lengths

Jetex Straight Lengths

Mild Steel or Stainless Steel. Available in 1.75", 2", 2.5", 3" and 3.5" diameters. Mild or stainless steel. 1000mm or 500mm lengths. Pipework dimensions are outside diameter. One end is flared/slotted.

Jetex Straight Lengths

Bends

Jetex Bends

Mandrel Bends: Available in Mild or stainless steel. 30, 45, 60 or 90 degree angles. One end is flared/slotted.

Tight 90 Degree Bends: Need welding. Available in 1.75", 2", 2.5", 3" and 3.5" diameters. Mild or stainless steel. These bends are constructed using two pressed plates welded together. There are NO flared ends with these parts.

180 Degree Bends: Available in 1.75", 2", 2.5" and 3" diameters. Stainless steel. These are mandrel bends. There are NO flared ends with these parts.

Jetex Bends Over Axle Bends: Available in 1.75", 2", 2.5" and 3" diameters. Mild or stainless steel. These are mandrel bends. One end is flared/slotted.

Jetex Bends

Flexi Tube

Jetex Flexi Tube

Mild Steel or Stainless Steel. Available in 1.75", 2", 2.5", 3" and 3.5" diameters.

Jetex Flexi Tube

Adaptors

Jetex Adaptors

Double-End Sleeves, Stepped Sleeves, Y-Pieces, T-Pieces and X-Pieces (Ideal for V6 and V8 engines where each bank of exhaust gas should be brought together before separating again)

Jetex Adaptors

Joint Compensators

Jetex Joint Compensators

Allows flexing between the manifold/downpipe and system to help prevent fracture. Available in 2", 2.5" and 3" diameters.

Jetex Joint Compensators

Flanges and Gaskets

Jetex Flanges and Gaskets

Mild steel flanges with gaskets or stainless steel flange assemblies for welding. Available in 1.75", 2", 2.5" and 3" diameters.

Jetex Flanges and Gaskets

Flexible Coupling

Jetex Flexible Coupling

1.75", 2", 2.5" and 3" in stainless steel. Allows movement to prevent fracture between the downpipe and the rest of the exhaust system.

Jetex Flexible Coupling

Silencers & Catalytic Convertors

Jetex Silencers

All silencer boxes are straight through absorption designed. Noise is reduced by absorption through a centre perforated tube.
Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.
4 Cylinder Engines - use 2 or 3 silencers for street and 1 or 2 for competition.
6 Cylinder engines - use 3 or 4 silencers for street and 2 or 3 for competition.

Jetex catalytic converters are available in performance 200 CPSI or competition 100 CPSI formats in a range of bore sizes from 2" to 3"

Jetex Silencers

Tail Pipes

Jetex Tail Pipes

Stainless Steel tailpipe finishers in round or oval styles. End is flared/slotted. Include damping inserts.

Jetex Tail Pipes

Brackets and Mountings

Jetex Brackets and Mountings

Range includes -
Rubbers (many styles available), M8 rubber cushion, hanging strap, hanging bracket (hook or right angled), U clamps (galvanised), ring clamps (galvanised), single bolt clamps (stainless).

Jetex Brackets and Mountings