Pipercross
In tests, Pipercross’ unique foam filter offered superior filtration and air flow after 500 miles. This means you won’t need to clean your Pipercross filter as frequently as other brands, leaving you more time to enjoy driving!
Pipercross Replacement Panel Filters
For those wishing to keep the original air box, Pipercross make these high flow direct replacement elements. Huge range available.
Air filter elements for carburettor equipped cars also available.
PX700 Universal Cone Filters
Ideal for turbo and induction filters.
It consists of an aluminium spun neck incorporating a full radius ram pipe which is bonded to a high performance foamair filter.
PX7000 Universal Intake
The PX7000 cone is supplied with four mouldedpolyurethane neck reducers to maximise fitments from one part number.
The filter features a Vortex foam filter, polished end cap, 150mm base and an 88mm neck.
Suppliued with 75, 70, 65 and 60mm reducers.
Crankcase Breathers
Vents contaminated oil and water mixture from the engine block into the atmosphere. To atmosphere’ breathers use a crushed aluminium filter.
Pipercross sealed in-line breather filters use a reticulated foam which can be cleaned for long life and efficiency.
Pipercross Air Induction Kits
Pipercross Air Induction Kits contain a uniquely designed air filter inlet, manufactured from a spun aluminium base. This incorporates a full radius air inlet bell mouth, allowing the air to smoothly pass into the engine.
Each kit contains a comprehensive fitting kit and comes with full instructions.
PX300 Range
Designed for road and competition use. The filter consists of a lightweight plate bonded to a high performance filter element.
The element is made from a three layer laminate foam and is supported internally by a metal cage.
The PX300 can be fitted on a large range of carburettors by use of a back plate which is ordered separately.
PX600 Range - Twin Carb
A single high performance filter designed to fit twin sidedraught carburettors for both road and competition use.
Using the separately available back plate, it can fit the Dellorto DHLA, Weber DCOE and DCO/SP carbs.
Trumpet Socks
Specially designed for applications where room is restricted. Made from competition laminate foam.
VIPER Cold Air Induction Kits
The VIPER Induction Kit uses ‘velocity air force’ to direct cool air directly into the engine. The cold air feed takes air from behind the grill straight to the Viper’s 100mm diameter inlet. It swirls the air through a unique Pipercross velocity filter contained within a carbon fibre heat shield (to protect the air charge from underbonnet heat for maximum power), and then into a ram pipe to increase its pressure before feeding it into the induction system. The increase in power using a Viper against a standard air box will be immediately evident.
600 Series Air Box
The 600-series sealed airbox is designed to fit all PX600 back plates and is ideal for vehicles where intake space is restricted. * airbox orientation when viewed from front of trumpets.
Features
- Dramatically reduces intake temperatures
- Reduction in intake noise - ideal for trackday regs
- 78mm depth, designed for space-critical applications
- Suitable for rampipes up to 45mm height
- Replaceable foam Pipercross filter, with 75mm or 100mm alloy air intake
- Also available without filter
Cold Air Feed
Extends from wm to over 1m. Radiused inlet and outlet, increases air mass to filter. Ends available in different colours.
Service Kit
To suit all Pipercross air filters. Each kitcontains two 75ml aerosols - one is a cleaner additive, the other is a dirt retention additive.