A full dry sump engine kit using the Titan Series 2 oil pump with 3 stages (2 scavenge & 1 pressure stage). Pressure outlet and scavenge inlet stages use bolt-on fittings whilst the pressure inlet and scavenge outlet stages are threaded 1/2BSP.
The oil pump is mounted to the distributor side of the block and driven by a gear fixed to the jackshaft pulley (Note that the front of the jackshaft pulley will need minor machining in a lathe to provide a suitable location for the oil pump drive pulley).
The oil pump mounting bracket and fixings supplied are for the later 205/202/200 type blocks. An alternative mounting bracket is available for earlier pre-205 blocks on request. The kit also includes a Poly V water pump drive kit, driven from the crank.
The pressure outlet from the oil pump is 5/8BSP. Note - the pressure feed to engine is not supplied as this needs to pass through a remote oil filter for which there are several options.
The sumps are now produced from cast aluminium and have 3/4" scavenge outlets. The sump has a cut out in the centre of the trough and suits applications that require clearances for crossmembers e.g. Escort Mk1 & Mk2. The sump has 3 additional M10 mounting locations at the front and also provides a mounting location for a Cosworth YB crank TDC sensor bracket.
The oil pump has the facility to drive a mechanical tacho from the rear and a blanking plate is included for applications that don't require this option.Contents:
3 stage oil pump with 90deg ports
Oil pump drive pulley (jackshaft)
Oil pump drive belt
Oil pump mounting bracket kit
Oil pump steady bracket and spacer
Cast alloy sump kit with 3/4" scavenge outlets
Water pump poly V kit
Scavenge inlet pipes x 2 (3/4" push-on steel)
Scavenge outlet fitting 5/8BSP(alloy)
Scavenge outlet blank 1/2BSP (alloy)
Pressure inlet fitting 5/8BSP (alloy)
Pressure outlet fitting 5/8BSP (steel bolt-on)
Oil hose 3/4" & hose clips
Tacho drive blanking plate
Ford SOHC Pinto
- Ford Escort Mk1 RS2000 2.0 1973-1974
- Ford Escort Mk2 RS2000 2.0 & Mexico 1.6 1975-1980
- Additional Information
Part No DSE056AK Fits Engine Type Ford Cosworth YB, Ford SOHC (Pinto) Product Group Oil Pumps (Dry Sump) & Kits Stock Status Stock Overdue - contact sales Fits Engine Make Ford Catalogue 2018 Page Click HERE to view this part on page 37 of our 2018 catalogue Brand Logo Free Shipping
You may also be interested in the following product(s)
Ring gear pre-engaged 10.167" turned diameter - suits Burton steel flywheels & OE flywheels 1970- FT257BNo Tax, Each £40.54 Taxed, Each £48.65
No Tax, Each £38.96 Taxed, Each £46.75
No Tax, Each £25.59 Taxed, Each £30.71
No Tax, Each £30.02 Taxed, Each £36.02
No Tax, Each £114.97 Taxed, Each £137.96
No Tax, Each £10.97 Taxed, Each £13.16