The Lug Drive type assembly utilises a one piece aluminium alloy cover and lug design which provides structural strength, lower inertia and cooler running. This design also allows for friction dust to freely escape.Torque capacity: 848Nm(625lb/ft).
Use with sintered type clutch plate which must be purchased separately (most common type is CP2012). Sintered clutches are primarily used for circuit race applications and do not suit applications where a degree of clutch slip is required (such as rallying, hill climbing, etc).
Popular clutch plates (2 required):
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
Wear clips - CP3912-102
Main pressure plate - CP3921-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
- Additional Information
Part No CP7372-CE90-SF Product Group Clutches: 7.25" AP Racing Replaces Part Nos FP269LGY Stock Status Stock Lead Time Typically 4-7 days Catalogue 2018 Page Click HERE to view this part on page 110 of our 2018 catalogue Brand Logo Free Shipping Additional Information
You may also be interested in the following product(s)
No Tax, Each £71.58 Taxed, Each £85.90
No Tax, Each £161.66 Taxed, Each £193.99
No Tax, Each £0.67 Taxed, Each £0.80
No Tax, Each £137.56 Taxed, Each £165.07
No Tax, Each £48.75 Taxed, Each £58.50
Ring gear pre-engaged 10.167" turned diameter - suits Burton steel flywheels & OE flywheels 1970- FT257BNo Tax, Each £41.58 Taxed, Each £49.90