020 8518 9136sales@burtonpower.com

Welcome, Guest

Cometic multi-shim head gasket 0.060"/84mm, Ford X/Flow OHV Kent, pre-X/Flow, BDA & Lotus Twin Cam C4140-060

Cometic multi-shim head gasket 0.060"/84mm, Ford X/Flow OHV Kent, pre-X/Flow, BDA & Lotus Twin Cam C4140-060
No Tax, Each £99.58 Taxed, Each £119.50
Available From Stock
.060" thick multi-layer shim steel. Cometic MLS gaskets are ....


Cometic part number: C4140-060
Gasket bore: 84mm
Gasket thickness: 0.060" (1.52mm)
Gasket type: multi-layer shim steel

Cometic MLS gaskets are comprised of multiple layers of stainless steel due to its increased strength, ability to rebound and resistance to corrosion. The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber based material that is heat resistant to 250C / 482F. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The centre or shim layer is a uncoated stainless steel layer which can be varied to accommodate multiple thickness requirements. They provide maximum sealing performance for today’s high output engines and require no sealants. Ideal for aluminium heads to aluminium blocks and aluminium heads to cast iron blocks withstanding the shearing force created by the two materials.

No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion.

A surface finish of 50 microinches or finer is recommended for a proper gasket seal. Anything rougher may result in gasket failure.

Ford Pre-Crossflow OHV Kent
  • Ford Anglia 105E 1.0 1959-1967
  • Ford Anglia 123E 1.2 1959-1967
  • Ford Cortina Mk1 1.2/1.5 1962-1966
  • Ford Cortina Mk2 1.2/1.3/1.5 1966-07/1967
  • Ford Consul Classic 1.3/1.5 1961-1963
  • Ford Consul Capri 1.3/1.5 1961-1964
  • Ford Consul Corsair 1.5 1964-1965
  • Ford Prefect 107E 1.0 1959-1961
  • Marcos 1500 GT
  • Morgan 4/4 1.0/1.3/1.5 1960-1968
Ford Crossflow OHV Kent
  • Ford Capri Mk1 1.3/1.6 1969-1974
  • Ford Capri Mk2/Mk3 1.3 1974-1987
  • Ford Cortina Mk2 1.3/1.6 07/67-1970
  • Ford Cortina Mk3 1.3/1.6 1970-1976
  • Ford Cortina Mk4/Mk5 1.3 1976-1982
  • Ford Escort Mk1 1.1/1.3/1.6 Mexico 1968-1974
  • Ford Escort Mk2 1.1/1.3/1.6 1975-1980
  • Ford Fiesta Mk1 1.3 Supersport/1.6 XR2 1980-1983
  • Caterham 7
  • Morgan 4/4 1600 1.6 1968-
  • TVR 1600M 1.6 1972-1977
Ford Lotus Twin Cam 8v 1558cc
  • Ford Lotus Cortina Mk1 1963-1966
  • Ford Lotus Cortina Mk2 1967-1970
  • Ford Escort Twin Cam 1968-1970
  • Lotus Elan 1962-1974
  • Lotus Europa 1971-1975
  • Caterham 7 1973–1974
Ford Cosworth BDA 16v
  • Ford Escort Mk1 RS1600 1970-1974
  • BDA 1.6 road engine
  • BDB/BDC 1.7 rally/race engine
  • BDD 1.6 race Atlantic engine
  • BDH 1.3 race engine
  • BDJ 1.1 race engine
  • BDR 1.6/1.7 Caterham Super Seven engine
Additional Information

Additional Information

Part No C4140-060
Fits Engine Type Ford BDA/BDG 16v, Ford Cross Flow (Kent), Ford Lotus Twin Cam 1558cc 8v, Ford Pre Cross Flow
Part Type Head Gasket
Product Group Gaskets & Seals
Stock Status Available From Stock
Fits Engine Make Ford
Material Multi Layer Steel (MLS)
Thickness .060"
Brand Logo Cometic Gaskets

You may also be interested in the following product(s)