020 8518 9136sales@burtonpower.com

Welcome, Guest

Farndon EN40B steel crankshaft 9 bolt 77mm: Ford 2.0 SOHC Pinto FT326/77

Farndon EN40B steel crankshaft 9 bolt 77mm: Ford 2.0 SOHC Pinto FT326/77
No Tax, Each £1,217.94 Taxed, Each £1,461.53
Available From Stock
Free UK Delivery Available
All Farndon crankshafts are designed and manufactured to you....


All Farndon crankshafts are designed and manufactured to your exact needs; they are produced in house, from the very best material.


Farndon’s steel supplier is Corus. Corus is one of the worlds leading producers of alloy and aircraft steels. Material is manufactured to the highest cleanliness and quality standards, exceeding the minimum requirements of the British standards.

Their experience over many years has shown Corus material most suited to the manufacturer of crankshafts. Cleanliness means rejections, due to steel defects are minimal. Ultrasonic examination is carried out on the rolled bar after heat treatment to ensure there is no cracking.

The sulphur content is controlled to give good mach inability and minimize the risks of sulphides causing problems with finished components.

We believe this contributes significantly to producing high quality crankshafts.

Heat treatment:

All Farndon crankshafts are heat treated to raise the core strength of the crankshaft. The procedure we use is dependant on the application of the engine.


The crankshafts are Nitrided for 72 hours (unless otherwise stated by the customer). This procedure gives the crankshaft a case depth of min .5mm to .6mm and a minimum hardness of 750HV. The benefit of this is to give the crankshaft a much harder wearing surface.

All Farndon EN40B steel crankshafts are manufactured from solid steel billet. Farndon are also able to manufacture any crankshaft on a one-off basis. Please enquire if your application is not listed.

Ford SOHC Pinto
  • Ford Capri Mk1/Mk2/Mk3 2.0 1972-1987
  • Ford Cortina Mk3/Mk4/Mk5 2.0 1970-1982
  • Ford Escort Mk1 RS2000 2.0 1973-1974
  • Ford Escort Mk2 RS2000 2.0 1975-1980
  • Ford Granada Mk2 2.0 1977-1985
  • Ford Granada/Scorpio Mk3 2.0 1985-1989
  • Ford Sierra 2.0 1982-1989
  • Ford Transit Mk2/Mk3 2.0 1978-1994
  • TVR Tamsin 200 2.0
Note: a 9 bolt flywheel will be required to use this crank on a Pinto engine (std Pinto is 6 bolt).
Additional Information

Additional Information

Part No FT326/77
Fits Engine Type Ford SOHC (Pinto)
Product Group Crankshafts
Stock Status Available From Stock
Fits Engine Make Ford
Catalogue 2018 Page Click HERE to view this part on page 19 of our 2018 catalogue
Brand Logo Farndon
Free Shipping Free UK Delivery Available

You may also be interested in the following product(s)