Free Uk Delivery available

This 4 pot kit uses a larger two piece 300mm vented disc (separate alloy bells) with the powerful Superlite caliper. Included in the kit:
  • Wilwood forged Superlite caliper x 2
  • Caliper mounting bracket x 2
  • Vented brake disc x 2
  • Alloy mounting bell x 2
  • Hardware kit

Note: brake pads are not included. Please see further below for the range of brake pad options for this kit.

Also note that brake hoses are also not included. The calipers have an M10x1 male outlet from the rear centre. Whilst many customers choose to make their own solutions, we can supply brake pipes made to your requirements.

Wilwood 4 Pot Forged Superlite Caliper: The Superlite caliper has been the workhorse of the Wilwood caliper range enjoying success from fast road to heavy race applications. The new Forged Billet Superlite caliper takes all the best features of the old Superlite cast caliper but packaged into a lightweight super stiff drop forged billet body. The forging process aligns the internal grain structure within the billet, resulting in a stress-flowed premium grade alloy billet which is stronger and stiffer than any cast caliper or machined billet.
The design of the new Superlite is the result of considerable investment in dynamometer testing combined with computer generated modelling and stress/stiffness technology. Wherever possible machined steps have been avoided and radii maximised to increase overall body stiffness and elimination of stress concentration points. The centre bridge bolt assembly replaces split pins and the closed end bridge design all contribute to additional clamping force with minimum deflection under load. On track testing has proven driver satisfaction reporting improved stopping power, a positive firm pedal with less pedal travel.
The caliper utilises Wilwood's 'SRS' - Squeal Reduction System - stainless pad retention plates eliminate bridge wear due to pad gouging and dampen pad rattle/vibration harmonics which are the primary cause of the annoying low speed caliper squeal.
The caliper retains square faced 'O' ring seals for positive sealing, controlled piston retraction and long service life in high temperature conditions and stainless steel deep cut pistons resist corrosion and retard heat transfer.

Disc size: 300 x 32mm

Minimum wheel size: 15"*

Brake pads suitable for this kit (not included):
Wilwood SmartPad fast road brake pads: 150-8854K
Wilwood PolyMatrix Q fast road brake pads: 15Q-6829K
Ferodo DS2500 race brake pads: FER3097H
Wilwood PolyMatrix E rally brake pads: 15E-6084K
Wilwood PolyMatrix A race brake pads: 15A-5938K
Ferodo DS3000 race brake pads: FER3097R

Application:
  • Ford Escort Mk3 1.1/1.3/1.6/1.6D 1980-1985
  • Ford Escort Mk3 1.6i/XR3i 1982-1985
  • Ford Escort Mk3 RS Turbo Series 1 1984-1985*
  • Ford Escort Mk3 RS1600i 1981-1983*
  • Ford Escort Mk3 XR3 1980-1982
  • Ford Escort Mk4 1.1/1.3/1.4/1.6/1.6D/1.8D 1986-1990
  • Ford Escort Mk4 1.6i/XR3i 1986-1990
  • Ford Escort Mk4 RS Turbo Series 2 1986-1990
  • Ford Orion Mk1 1.3/1.6/1.6D 1983-1985
  • Ford Orion Mk2 1.4/1.6/1.6D/1.8D 1986-1990
* Note that this kit will not fit with the original RS1600i/Series 1 RS Turbo alloy wheels due to internal wheel clearance issues.
More Information
Part NoRDBK14A/L4
Product GroupBrake Kits
Stock StatusStock Lead Time Typically 1-2 weeks
Catalogue 2024 PageClick HERE to view this part on page 123 of our 2024 catalogue
Brand LogoWilwood Disc Brakes
Fits Model VariantFord Escort Mk3 (All), Ford Escort Mk4 (All)
Shipping & Delivery

We aim to dispatch all stocked orders either same day (Monday-Friday) or by the following working day (subject to time of order). Orders are shipped by DHL courier service.

For orders that require a guaranteed quick delivery, please contact our sales staff directly by phone who can advise further on your request.

Shipping Prices UK

All orders under £250 will be sent by DHL courier service
Up to 3kg £8.00
3kg-20kg £9.60

All UK orders over £250 are shipped free of charge by DHL.

Shipping Prices Overseas

All deliveries are sent by DHL courier service. Most European countries have the option of an Economy Road Service (with prices starting from £26.00) and Express Air Service. All non-European countries are sent by DHL Air Express. To get a quote for shipping, simply enter the items into the cart, click on ‘My Cart’ and select your country. You do not need to be logged in to use this service.

Note: we are unable to export dangerous goods such as aerosol cans and such items must be removed from the cart before you can proceed with your order.

This 4 pot kit uses a larger two piece 300mm vented disc (separate alloy bells) with the powerful Superlite caliper. Included in the kit:
  • Wilwood forged Superlite caliper x 2
  • Caliper mounting bracket x 2
  • Vented brake disc x 2
  • Alloy mounting bell x 2
  • Hardware kit

Note: brake pads are not included. Please see further below for the range of brake pad options for this kit.

Also note that brake hoses are also not included. The calipers have an M10x1 male outlet from the rear centre. Whilst many customers choose to make their own solutions, we can supply brake pipes made to your requirements.

Wilwood 4 Pot Forged Superlite Caliper: The Superlite caliper has been the workhorse of the Wilwood caliper range enjoying success from fast road to heavy race applications. The new Forged Billet Superlite caliper takes all the best features of the old Superlite cast caliper but packaged into a lightweight super stiff drop forged billet body. The forging process aligns the internal grain structure within the billet, resulting in a stress-flowed premium grade alloy billet which is stronger and stiffer than any cast caliper or machined billet.
The design of the new Superlite is the result of considerable investment in dynamometer testing combined with computer generated modelling and stress/stiffness technology. Wherever possible machined steps have been avoided and radii maximised to increase overall body stiffness and elimination of stress concentration points. The centre bridge bolt assembly replaces split pins and the closed end bridge design all contribute to additional clamping force with minimum deflection under load. On track testing has proven driver satisfaction reporting improved stopping power, a positive firm pedal with less pedal travel.
The caliper utilises Wilwood's 'SRS' - Squeal Reduction System - stainless pad retention plates eliminate bridge wear due to pad gouging and dampen pad rattle/vibration harmonics which are the primary cause of the annoying low speed caliper squeal.
The caliper retains square faced 'O' ring seals for positive sealing, controlled piston retraction and long service life in high temperature conditions and stainless steel deep cut pistons resist corrosion and retard heat transfer.

Disc size: 300 x 32mm

Minimum wheel size: 15"*

Brake pads suitable for this kit (not included):
Wilwood SmartPad fast road brake pads: 150-8854K
Wilwood PolyMatrix Q fast road brake pads: 15Q-6829K
Ferodo DS2500 race brake pads: FER3097H
Wilwood PolyMatrix E rally brake pads: 15E-6084K
Wilwood PolyMatrix A race brake pads: 15A-5938K
Ferodo DS3000 race brake pads: FER3097R

Application:
  • Ford Escort Mk3 1.1/1.3/1.6/1.6D 1980-1985
  • Ford Escort Mk3 1.6i/XR3i 1982-1985
  • Ford Escort Mk3 RS Turbo Series 1 1984-1985*
  • Ford Escort Mk3 RS1600i 1981-1983*
  • Ford Escort Mk3 XR3 1980-1982
  • Ford Escort Mk4 1.1/1.3/1.4/1.6/1.6D/1.8D 1986-1990
  • Ford Escort Mk4 1.6i/XR3i 1986-1990
  • Ford Escort Mk4 RS Turbo Series 2 1986-1990
  • Ford Orion Mk1 1.3/1.6/1.6D 1983-1985
  • Ford Orion Mk2 1.4/1.6/1.6D/1.8D 1986-1990
* Note that this kit will not fit with the original RS1600i/Series 1 RS Turbo alloy wheels due to internal wheel clearance issues.
More Information
Part NoRDBK14A/L4
Product GroupBrake Kits
Stock StatusStock Lead Time Typically 1-2 weeks
Catalogue 2024 PageClick HERE to view this part on page 123 of our 2024 catalogue
Brand LogoWilwood Disc Brakes
Fits Model VariantFord Escort Mk3 (All), Ford Escort Mk4 (All)
Shipping & Delivery

We aim to dispatch all stocked orders either same day (Monday-Friday) or by the following working day (subject to time of order). Orders are shipped by DHL courier service.

For orders that require a guaranteed quick delivery, please contact our sales staff directly by phone who can advise further on your request.

Shipping Prices UK

All orders under £250 will be sent by DHL courier service
Up to 3kg £8.00
3kg-20kg £9.60

All UK orders over £250 are shipped free of charge by DHL.

Shipping Prices Overseas

All deliveries are sent by DHL courier service. Most European countries have the option of an Economy Road Service (with prices starting from £26.00) and Express Air Service. All non-European countries are sent by DHL Air Express. To get a quote for shipping, simply enter the items into the cart, click on ‘My Cart’ and select your country. You do not need to be logged in to use this service.

Note: we are unable to export dangerous goods such as aerosol cans and such items must be removed from the cart before you can proceed with your order.

You May Also Be Interested In

© 2001-2024 Burton Power. All Rights Reserved.